| Products |
 |
We produce Wire bending machines in both 2 and 3 axis models that cover a range of wires from 2mm (0.08") to 16mm (0.63"), assuming the wire has a tensile strength of 300 - 400 N/mm2 (approx. 26 to 35 tons/sq. inch). Similar machines for bending tube are capable of forming wire with a diameter that ranges from 3mm (0.12") to 15mm (0.59").
| Model | Designations | Descriptions | More info |
| PB400 | Wire or Tube | The PB400 is specifically designed to work on the smaller diameter wires and tubes. | More... |
| PB600 | Wire or Tube | This machine has become the industry standard with manufacturers of beer coolers, soft drinks dispensers, refrigerators, air conditioners and small bore automotive componenets. | More... |
| PB600 2-axis | Tube only | This machine is fitted with a fixed bending table which allows the formation of componenets upto 1.5m by 2m. | More... |
| PB600 SOLAR | Tube Only | This variation on the PB600 is fitted with a large horizontal table. Its main use is in the manufacture of large serpentines which are used in heat regulation systems fitted in the ceilings of large industrial and commercial buildings. | More... |
| PB800 | Wire or Tube | The PB800 is designed to bend wires from 2-8mm. | More... |
| PB1000 | Wire or Tube | The PB1000 is designed to bend wires from 4-10mm. | More... |
| PB1200 | Wire or Tube | The PB1200 is designed to bend wires from 6-13mm. | More... |
| PB1500 | Wire or Tube | The PB1500 is designed to bend wires from 6-16mm. | More... |